9KW Sauna Heater Stove Dry Sauna Stove With External Controller. Exter-controller can control both light, time and temperature Over-High Temperature Protection to prevent dry burning Press "Prepare to Place" to Set the Start Time: (Max 24 hours in advance). Heater body structure, firmer stainless steel, overheating protection system, high-grade heating elements anti-rust & durable.The heating coil is made of crafted 304 stainless steel, which has better thermal conductivity, fast to heat, and high-efficient. This 9kw sauna heater needs 18-20kg sauna stones(not included). This is an outer-controlled sauna heater, you can adjust heat temperature & work time easily. (1) time mode: start to work after setting, working time: max. (2) temperature adjust: the highest temperature is 90ºC.
Quick & easy to install, this heater sauna has mounting holes at the back. It should be wall-mounted 18cm height from the ground. All accessories are included in the package.
Uused for dry sauna and spa, suitable for both home & commercial occasions. Help to relax the muscle, relieve fatigue, help to improve your sleeping quality, perspire sweat & body waste, etc. Room Volume: 9KW - 13M³ (460 cubic feet).Product Width: 3 in/ 75mm. Product Length: 9 in/ 225 mm. Product Height: 10 in/ 250 mm. Suitable Sauna Stone:9KW - 18-20kg (not included). Designed with an excellent steel structure for durability and corrosion-proof, the sauna heater can be used in a wet sauna room for a long tim.
316 Stainless Steel Coil The dry sauna heater adopts dual heat-proof 316 heating coils for a fast heating effect; you may get complete relaxation in a short time. To adjust the heating time and set the desired temperature; you can get an easy operation with humanized designs. Complete accessories are prepared for your quick installation. Only one person can finish the assembly of the steam sauna heater within a few minutes. With our functional sauna stoves, you will never go for a sauna room while you will have a cost-saving and time-saving sauna at home.
1x Digital controller 1x Sauna heater 1x Temp sensor 1x User manual. Other Accessories as Shown in the Picture. Only qualified electricians may connect the device to the electric supply, taking current, valid safety regulations into consideration.The connecting cables of the mains supply to the heater must be rubber insulated cables. Rinsing Sauna Stones before they are loaded into the heater container; the largest ones should be loaded at the bottom. Do not load the stones too tight, ensure that air can easily move between the stones so the heating elements can achieve an even cooling. When the Sauna stones are broken or crumbling, please replace, otherwise they may damage the heating elements.
The diameter of the stones is usually 3-8 cm. Good ventilation is a must for the sauna, and correctly installed ventilation.The fresh air intake should be located on the wall near the bottom of the sauna heater. The diameter of air intake must be at least 6 cm. The exhaust opening should be located on the wall opposite to and as far away as possible from the air intake inlet. The diameter of the exhaust opening must be twice the size of the intake. The exhaust opening must be situated under the bottom of the upper benches.
To avoid an electrical shock, all installation and relevant services must be performed by qualified personnel. Spend a maximum of 30 minutes in the sauna. Bathing too long may cause your heart to race, chest pains, weakness or dizziness.Should the bather experience any of the above symptoms, stop bathing immediately. Sauna may cause tension to the bather. Therefore, if you have any of the following, please consult your physician or health care professional before using the sauna. Also, do not use the sauna after drinking alcohol, taking medication or if you are not feeling well. Children must be accompanied by an adult. Risk of being scalded: Do not touch the sauna heater or its trim, as both are hot. Keep a distance of at least 30cm from the heater. California Warehouse: City of Industry, CA.