It has the advantages of beautiful appearance, perfect performance and low noise. It can provide highquality steam for your bathroom for many years. With ON/OFF button, turn on/off the sauna heater.
The display window displays the temperature in the sauna room at startup. The sauna stove controller can improve the effect of the sauna, and can adjust the temperature control, time control, lighting control and other effects of the sauna room to adapt to various family saunas, spa clubs, etc. Carefully designed, compact structure, beautiful appearance, sturdy and durable, stable and reliable, easy to install and maintain. Item Type: Sauna Heater Controller Material: Stainless Steel Color: As shown in the picture Size: Approx. 30.5x26x7cm / 12.0x10.2x2.8in Weight: Approx.3500g/123.5oz Power: 3-9KW Voltage: 380-415VAC/50Hz Installation of control panel and temperature probe: 1. Control panel: It can only be installed outside the room. For ease of use, it is recommended to install the control panel at a height of 1.2m/3.9ft from the ground.
A hole of 45x85mm / 1.8x3.3in must be opened on the wall so that the back of the control panel can be insert. The installation of the temperature probe: the recommended position of the temperature probe: 200mm/7.87in above the sauna heater from the roof. Operation guidance of LCD controller: 1. ON/OFF key: turn on/off the sauna heater. Illumination button: Turn on/off the lighting in the sauna room.
Temperature/time setting: press the setting key to enter the temperature setting state, the temperature number in the display window flashes, and the temperature can be set at this time. Press the up or down button to adjust the temperature you need (the range is 50110); then press the set button to enter the time setting, and the time number flashes at the same time, press the up or down button to set the working time of the sauna heater , The adjustment range is 30 minutes to 12 hours. Press the setting button again to exit the time and temperature setting, or it can automatically exit for 15 seconds without any key operation.If the temperature in the room is higher than the set temperature, the heat preservation indicator light is on, the heating indicator light is off, and the sauna heater stops heating. Only when the room temperature is lower than the set temperature by 2°C, the heating indicator light is high, the heat preservation indicator light is off, and the sauna heater starts heating. 1 x Sauna Heater Controller. 1 x Temperature Sensing Probe Wire. Please allow 1-2in error due to manual measurement.
Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export.Please check with your country's. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls.
Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
The item "3-9KW Sauna Stove Heater External Controller Intelligent Control Device 380-415V" is in sale since Thursday, November 11, 2021. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels". The seller is "koalastore_au" and is located in Shenzhen. This item can be shipped worldwide.